Knog QUDOS ACTION VIDEO LIGHT Bedienungsanleitung PDF herunterladen

Includes:

English

Page 1 / 2

A. Light Unit

B. Rechargeable LiPo Battery

C. Action Camera Mount

D. Cold shoe + Tripod Adaptor

E. Mount Hardware (short)

F. Mount Hardware (long)

G. USB Extension Cord

H. 2 x Anti-Vibration Pads

Notes:

Rechargeable LiPo battery already assembled into the Light Unit.

Suitable for use with Go Pro Hero 2, Hero 2+, Hero 3 and Hero

3+ models or any action camera with a GoPro-style mount.

Cold shoe + Tripod Adaptor suitable for mounting onto a variety of Digital SLR

models and can also be used for mounting directly to a tripod.

Anti-vibration pads of varying heights have been provided for optional use and

assembly onto the Light Unit surface that is mounted closest to the Action Camera.

Before first use:

Please fully charge the battery before you use the [qudos] Action Light for the first time.

Modes of use:

The On/O switch is located on the top of the Light Unit. Press/hold for 2 seconds to turn it on and o. To switch between modes press the button

for 1 second or less.

Removing the Battery:

Battery removal and insertion should be carried out in a clean, dust-

free environment. Ensure your hands are clean. Should the area

around the seal become dirty whilst handling, the seal will become

compromised. Please refer to “waterproof seal care” section for

further details and to ensure your product warranty is not voided.

Mounting [qudos] Action Light:

There are a variety of mounting options and models that will enable

you to capture images and video at night.

Action Cameras:

Use parts C and E

DSLR Cameras:

Use parts D and E

Tripods:

Use parts D and E

Scuba Diving applications:

Using the standard Action cam mount whilst scuba diving may

produce undesirable ‘backscatter’. For a more desirable result, use of

a dedicated dive camera tray, placing the [qudos] Action light at least

30-50cm away from the Action Camera, is suggested.

1. Rotate tab, 2. Lift tab to release battery door, 3. Open battery

door, 4. Remove battery from Light Unit.

1. Connect battery to USB Extension cord provided.

2. Connect USB to a computer USB port or other electronic device

with USB port.

A full charge cycle will take 5-6 hours. Battery charge status LED

located at bottom of the battery.

Wall charger Specifications:

If using a wall charger, use an approved USB charger only. AC input: 90-260VAC 50/60Hz. DC Output: 5VDC (+0.25V/-0.1V) 2A.

Use chargers with suitable approvals and certifications only. Charging conditions: Indoors only in temperatures above 10°C (50°F).

Note: Repeat steps in reverse to replace battery in Light Unit.

Recharging the Battery:

A B C D E HF G

Beam Angle

Wide

Narrow

Ultra wide

Mode

Action

Target Spot

Ambient

Lumens

400 High / 225 Low

175 High / 100 Low

270 High / 70 Low

Runtime (hrs)

0.7 High / 1.3 Low

1.5 High / 2.8 Low

1.1 High / 4.3 Low

Icon

2 3 4

LED

1 2

A B C D E HF G 1
Product Maintenance 2

Inhaltsverzeichnis

Seite 1 - A B C D E HF G

Includes:English Page 1 / 2A. Light UnitB. Rechargeable LiPo Battery 1C. Action Camera Mount 2D. Cold shoe + Tripod Adaptor 3E. Mount Hardware (s

Seite 2 - Product Maintenance

Washing the lightWith the Light Unit battery door firmly closed, clean visible particles of debris from the body of the light with assistance of runni

Weitere Dokumente für Für Fahrräder Knog QUDOS ACTION VIDEO LIGHT

Um das Dokument anzuzeigen Knog QUDOS ACTION VIDEO LIGHT Bedienungsanleitung

Knog QUDOS ACTION VIDEO LIGHT Bedienungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Knog QUDOS ACTION VIDEO LIGHT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Fahrräder Knog QUDOS ACTION VIDEO LIGHT herunter. Knog QUDOS ACTION VIDEO LIGHT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Für Fahrräder Knog QUDOS ACTION VIDEO LIGHT

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Fahrräder Knog QUDOS ACTION VIDEO LIGHT